The Setup And Transfer fixture

Setup And Transfer fixture

SAT fixture with 3/8 inch dops

This fixture is accurate, easy to use and inexpensive, designed by a professional faceter for professionals and dedicated hobbyists. The SAT™ accomodates dop diameters from 1/4 to 1/2 inch (6 to 12 mm.) that have a length of at least 2 inches (50 mm.).

We have gone off the rails with the SAT™: The faceter sets up and transfers stones by simply pushing the back of one dop and tightening a clamp. The SAT™ will not produce a misalignment.

We precision machine the SAT™ fixture from aluminum alloy, hard coat it with dark sapphire, and add stainless steel metric studs, knobs, washers and springs with anodized aluminum alloy clamps for secure dop holding, corrosion resistance and durability.

The SAT™ will accomodate conventional 1/4 inch (6.5 mm.) dops and those up to 5/16 inch (8 mm.) by removing the springs and washers, which support the dop clamps for Adamas 3/8 inch (9.5 mm.) and other wide diameter dops up to 1/2 inch (12 mm.).

SAT for 1/4 inch dops

SAT with 1/4 inch dops

You can download and read a concise tutorial on how to use the SAT™ here.

SAT Fixture dimensions: 51x50x152 mm.

Please read our policies related to merchandise here.

top